Find a fence installation professional near you

Replace bottom window sill. Approximately 2.3m long. Add 1m length bottom rail to fence 1m long. Add fence palings x 13 approx 1.8 high

Panels are 2.6 x 1.2 and 2.5 x 1.2 colourbond cream.

Horizontal post on white picket fence has rotted 1/3. Either need to do a repair on this part or replace and re-drill pickets. Pickets must match existing design as we are in a heritage conservation area.

I need to pull down my fence and replace it with a timber picket fence that is pool compliant 1.8M minimum high all around the pool only and 1 metre off the metal pool gate. I’m in a corner block so easy to access and remove old fence.

Installation Aluminium louvres and awnings. Project in Gosford and ongoing.

I would like to get around 32 Bamboo fence panels installed, 26 - 2m x 1m and 6 - 1.8m x 1m.

Two rebuilt brick piers (marked #1 and #2 in photo attached) require concrete fence capping to match remaining brick piers (marked #3 to #5 in photo attached) One brick pier approx 35cm wide. Other brick pier approx 65cm wide. See photos Tasker to supply capping, remove temporary capping and install replacement capping and caulk in.

Hi I want to remove and dispose old Pavels in my back yard. and I want someone to install and supply concrete in my backyard. Area approximately width 4 meters x length 11 meters. Height about 15cm. Picture attached of current back yard. Text me if you can not reach me. Thanks

I have the latch already. Need it to be installed on a metal gate

I’m building a new picket fence and need someone to install 7 posts for me. The posts will be 600mm deep. I have the concrete and the posts onsite and can assist on the day if needed. I also need help removing this one post that has been concreted in and I’m having trouble removing it (see pic). Let me know if you have any questions.

Build small wood panel gate (with latch) to match balustrade. Do not need to paint. I will do this later. Can use existing posts, so just need to build gate and attach with hinges

I need a boiler maker/welder with experience in metal fencing to install 2 fence panels and a pedestrian gate at the front of the house. Work includes some welding, bracket fixation into metal with screws and metal that needs to be cut/trimmed. 1. Pedestrian gate – 2 sets of hinges to be screwed into the metal post (picture 1). Strike bar to be screwed into the opposite metal post with one part of the metal that requires trimming and a hole created for the gate latch bolt (picture 2). 2. Fence panels (2 panels) to be installed. The fence panel brackets will need to be screwed into the posts (4 brackets). The fence panels are slight wider and require trimming of the overhangs (horizontal bars) prior to attaching to the fence panel brackets. Both panels are attached to the larger post on each side. The other side of these panels are to be joined to the intermediate (smaller) post in the middle. This will require welding (picture 3). 3. The skirting of the posts (3 sets) will need to be welded on the foot of each post (please see picture). There is rear access for parking. There is no parking at the front of the house. Preferable this Saturday (04/05/24) or Sunday (05/05/2024).

Install new fence 4 sections each one is 1.2m, the other three sections are 2.1m.

We would like to get help building a 3x5x1.2m fence + swing gate around a new hot tub that we are getting delivered tomorrow. We have lots of wood already on hand from fences and decking that we removed a few months ago. We would love to also build a frame above the fence to trellis vines, but that's optional.

need temp fencing dismantled then transported to greystanes to then reinstall . You will need to bring your own tools.

Want to make two small enclosures for keeping dogs in the salon I have purchased two gates, hinges from Bunnings, need to divide them also unsure what other materials will need to come and see

Installation and painting of fence panels

I need a pool fence panel installed between a timber fence line and brick wall. It needs to be complaint. I have the panel and it’s been already precut to the best of my ability. I have two poles too if needed but no brackets. Would prefer someone who specialises in pool fences. Please see photos

Need 13 panels of temp fence installed on my boundary line. Plus feet and top brackets . Have all materials already on site. It is a sloping site so experience in fencing would be good . Definitely a 2 man job but only a day’s work involved .

The fence needs to be fixed. 250 meters wide